BrevTech
Kit de reparación de varilla de vapor de error Oracle ERR, ER13-ER16 para Breville (BES980,BES990)
Kit de reparación de varilla de vapor de error Oracle ERR, ER13-ER16 para Breville (BES980,BES990)
No se pudo cargar la disponibilidad de retiro
Repair steam-wand faults on Breville/Sage Oracle BES980 and BES990 machines. This kit is intended for ERR and ER13–ER16 errors associated with the steam-wand circuit.
Compatible models and errors
- Breville/Sage Oracle BES980: ERR error
- Breville/Sage Oracle Touch BES990: ER13, ER14, ER15 and ER16 errors
Installation requirements
Installation requires a heat gun or soldering iron and is intended for experienced repairers. Confirm the error code and machine model before ordering.
View the Breville Oracle ERR repair guide and video
DIY installation warning: Electrical repairs carry risk. Use a qualified technician if you are not experienced. Read the full disclaimer.
Share
Took 10 days for the kit to arrive in the UK (great!) It took me 3 hrs to fit the thermistor. The delay was because the 2 upward facing screws at the front of the unit are in a narrow channel and my "bit" driver was too fat to fit. It took me an hour to find a thin "bit" extender that would fit (doh!). So first tip, you need a standard medium crosshead screwdriver for these upward screws...this will also undo every other screw except the two at the top back...which are "star" or "torx" bits, so you will also need a set of those. On threading wire up the wand, if you get a torch and look up the wand you will see a small hole - put the wire through this and the first part is easy. Once you have pushed the wire through the first silver sleeve, this sleeve joins to a second metal sleeve at the top, and you need to thread the wire so that it doesnt just go into the second sleeve, but comes out at the gap between the two. So, pull the two sleeves apart and then use a thin implement to bend the wire through the gap between the lower and upper sleeve. After that its easy!
Thanks for the advice! it's a fiddly reparar for sure for those doing this for the first time. well done
Perfect item with clear instrucciones and fast shipping of the parts. Cannot be more thankful for you putting this together!
Perfect
I had an issue due to a faulty sensor, not the sellers fault at all! They were quick to fix the issue and very friendly. Thanks BrevTech! I highly recommend this company :)
Arrived in Norway in 1 week. Easy to install and the machine works again. Thank you for having this offer!