BrevTech
Oracle ERR、ER13-ER16 エラー Breville 用スチームワンド修理キット (BES980、BES990)
Oracle ERR、ER13-ER16 エラー Breville 用スチームワンド修理キット (BES980、BES990)
受取状況を読み込めませんでした
Steam Wand Repair Kit - Works on Breville Oracle range. Fixes ERR, ER13 - ER16 errors.
Feel free to message me if you need any advice before buying.
⚠️ - Installation requires a heatgun or soldering iron
Need more?
Checkout my other listings for the Survival Kits that contain all the components you'll need for the most common repairs on these machines.
Watch the repair video: How to Repair the Breville Oracle BES980 'Err' Error
⚠️ **DIY Installation Warning:** This product is intended for experienced users. Electrical repairs carry risk. We recommend using a qualified technician. See full disclaimer: https://brevtech.store/pages/disclaimer
Share
Took 10 days for the kit to arrive in the UK (great!) It took me 3 hrs to fit the thermistor. The delay was because the 2 upward facing screws at the front of the unit are in a narrow channel and my "bit" driver was too fat to fit. It took me an hour to find a thin "bit" extender that would fit (doh!). So first tip, you need a standard medium crosshead screwdriver for these upward screws...this will also undo every other screw except the two at the top back...which are "star" or "torx" bits, so you will also need a set of those. On threading wire up the wand, if you get a torch and look up the wand you will see a small hole - put the wire through this and the first part is easy. Once you have pushed the wire through the first silver sleeve, this sleeve joins to a second metal sleeve at the top, and you need to thread the wire so that it doesnt just go into the second sleeve, but comes out at the gap between the two. So, pull the two sleeves apart and then use a thin implement to bend the wire through the gap between the lower and upper sleeve. After that its easy!
Thanks for the advice! it's a fiddly 修理 for sure for those doing this for the first time. well done
Perfect item with clear 説明 and fast shipping of the parts. Cannot be more thankful for you putting this together!
Perfect
I had an issue due to a faulty sensor, not the sellers fault at all! They were quick to fix the issue and very friendly. Thanks BrevTech! I highly recommend this company :)
Arrived in Norway in 1 week. Easy to install and the machine works again. Thank you for having this offer!
