BrevTech
Kit de réparation de baguette vapeur Oracle ERR, ER13-ER16 pour Breville (BES980, BES990)
Kit de réparation de baguette vapeur Oracle ERR, ER13-ER16 pour Breville (BES980, BES990)
Impossible de charger la disponibilité du service de retrait
Kit de réparation de buse vapeur - Compatible avec la gamme Breville Oracle. Corrige les erreurs ERR, ER13 - ER16.
N'hésitez pas à m'envoyer un message si vous avez besoin de conseils avant d'acheter.
⚠️ - L'installation nécessite un pistolet thermique ou un fer à souder
Besoin de plus ?
Consultez mes autres annonces pour les kits de survie qui contiennent tous les composants dont vous aurez besoin pour les réparations les plus courantes sur ces machines.
⚠️ **Avertissement d'installation DIY :** Ce produit est destiné aux utilisateurs expérimentés. Les réparations électriques comportent des risques. Nous recommandons de faire appel à un technicien qualifié. Voir l'intégralité de la clause de non-responsabilité : https://brevtech.store/pages/disclaimer
Partager
Took 10 days for the kit to arrive in the UK (great!) It took me 3 hrs to fit the thermistor. The delay was because the 2 upward facing screws at the front of the unit are in a narrow channel and my "bit" driver was too fat to fit. It took me an hour to find a thin "bit" extender that would fit (doh!). So first tip, you need a standard medium crosshead screwdriver for these upward screws...this will also undo every other screw except the two at the top back...which are "star" or "torx" bits, so you will also need a set of those. On threading wire up the wand, if you get a torch and look up the wand you will see a small hole - put the wire through this and the first part is easy. Once you have pushed the wire through the first silver sleeve, this sleeve joins to a second metal sleeve at the top, and you need to thread the wire so that it doesnt just go into the second sleeve, but comes out at the gap between the two. So, pull the two sleeves apart and then use a thin implement to bend the wire through the gap between the lower and upper sleeve. After that its easy!
Thanks for the advice! it's a fiddly repair for sure for those doing this for the first time. well done
Perfect item with clear instructions and fast shipping of the parts. Cannot be more thankful for you putting this together!
Perfect
I had an issue due to a faulty sensor, not the sellers fault at all! They were quick to fix the issue and very friendly. Thanks BrevTech! I highly recommend this company :)
Arrived in Norway in 1 week. Easy to install and the machine works again. Thank you for having this offer!
