1
/
of
10
BrevTech
BREVILLE ORACLE SES & BES980/990 SURVIVAL / SERVICE KIT (120v 240v)
BREVILLE ORACLE SES & BES980/990 SURVIVAL / SERVICE KIT (120v 240v)
Regular price
$110.00 AUD
Regular price
Sale price
$110.00 AUD
Unit price
/
per
10 reviews
Couldn't load pickup availability
Survive the Coffee Machine Apocalypse with Our Ultimate Breville Oracle Survival Kit!
Whether it's a faulty pump, a buzzing solenoid, or a leaky seal, this kit allows you to fix all the common faults these machines suffer from.
Compatible with all Breville and Sage Oracle models - including 240v and 120v.
🪛 Some of the problems this kit will fix are:
- Loss of preinfusion
- Buzzing Solenoid
- Weak Pressure on Coffee or Steam pumps
- Leaking Seals
- Overheating / Under Heating
- 3 beeps of death
- Dead grinder
- Lack of milk froth
PREMIUM ORING SERVICE KIT
- 12x Small o-rings for hose connectors (water/steam) and NTC probes.
- 5x Large o-rings for thermal and water level probes. ⚠️ We recommend you always replace the probes rather than just the seals, due to the increased risk with descaling.
- 1x 10g tube of Food Grade Silicone Grease
- 1x Group Head Gasket/Seal & Vac valve o-ring
- 1x Spare hose clip
SOLENOID SERVICE KIT
Replacement (Brand new Genuine OLAB & Breville made) solenoid core and seals for Oracles with OLAB branded coffee solenoids or venturi solenoids.
This will resolve buzzing / most dispensing issues. Plus air/steam issues due to faulty venturi valves
TRIAC REPAIR KIT
3x Replacement Triacs, 1x Opto Isolator, 1x photocoupler and 1x zener diode to repair all common Traic Board faults on the Breville Oracle.
If your machine is has developed a heating problem caused by leaking orings or maybe the solenoid is stuck on, then this kit will save you money on a new board.
This kit includes a triac for the steam or coffee circuit and the group head circuit
These components will work on both 240v and 120v versions.
PUMP SERVICE KIT
Fixes weak pressure or loss of pre-infusion on the Coffee Pump (EP5 / EFP5 & Post 2021 EFM) and Steam Pumps (NMEHP)
1x Polypropylene pump valve ball
1x Coffee pump piston oring
1x Steam pump piston oring
https://www.youtube.com/watch?v=Gcuq22CC5kc
AIR PUMP
Often the reason your cappuccino looks more like a flat white
STEAM + COFFEE/GROUP BOILER THERMAL FUSES
Should the worst happen, then this will get you back on track. You'll get both types of fuses to cover any of the thermal fuses in the machine. There is also a steam boiler thermal switch as you'll likely need this if your machine has the 3 beeps of death. And finally, some locking connectors (important as non locking ones often fall off) and some spare insulation tubing incase yours is too short.
REPLACEMENT LID LATCH
Over time the top access panel latch can wear out or break off. We have you covered too with an easy to fit replacement.
CABLE MANAGEMENT KIT
Includes all the connectors you'll need to carry out any of the repairs
ℹ️ For more info, please check out this channel on Youtube:
https://www.youtube.com/@BrevTech
⚠️ **DIY Installation Warning:** This product is intended for experienced users. Electrical repairs carry risk. We recommend using a qualified technician. See full disclaimer: https://brevtech.store/pages/disclaimer
Share
G
Gary Really delighted with this repair kit.if you handy then saveyourself a fortune fixing your beloved sage coffee machine yourself.
Great kit with all I needed to perform a service and repair.
r
ricneil great kit, small but mighty. The videos made my repair much easier.
S
Sam Trinh Very good customer service.
Parts that I can’t find somewhere else.
E
Elie Great product. Thanks
P
Peter H. Great service from Brev-Tech. After sales service also fast helping further diagnose machine issues with great product knowledge. Very happy and would highly recommend!