BrevTech
Breville Steam Probe Set of 3 for all Dual Boiler & Oracle models.
Breville Steam Probe Set of 3 for all Dual Boiler & Oracle models.
Couldn't load pickup availability
This is a replacement set of three steam probes for the older style (pre-2023) steam boilers on the Sage/ Breville dual boiler machines.
❗Essential item for your 1-2 year service.
100% genuine Breville OEM parts (SP0001820) - Note, Breville used to use blue (silicone) o-rings, but have recently changed to black (Viton). These are now all the newer type.
❗❗Repairing your old probes is strongly advised against due to increased risk of machine failing during a descale.
🪛 Installation Instructions:
https://brevtech.store/pages/how-to-replace-the-steam-sensor-probes-on-your-breville-sage
Compatible Models:
- Breville BES900 BES920 (Dual Boiler)*
- Breville BES980 (Oracle)
- Breville BES990 (Oracle Touch)
- Sage equivalents in the UK/EU (SES 9xx series)
*The original BES900 probes are 10mm longer than these, but it should not make any difference.
❗The ceramic coating wears off over time, causing descale solution to interfere with the sensors, so I recommend you replace yours every second service i.e. 2-3 years to avoid problems during a descale. This is especially important on the BES990 (Touch screen version) as it is more suscebtible to failure during a descale.
▶️ Here are some videos i've made on the subject:
How to Test if your Breville Dual Boiler Coffee Machine Will Likely Survive a Descale. Part 1
How to Test if your Breville Dual Boiler Coffee Machine Will Likely Survive a Descale. Part 2
Will Your Breville Oracle Touch (BES990) Survive a Descale?
How to Safely Descale Your Breville Dual Boiler (BES920) & Oracle (BES980,BES990)
How to Safely Descale Your Breville Dual Boiler (BES920) & Oracle (BES980,BES990)
Tips from the technician:
"Replacing them only takes about 10 minutes. To make them easy to install, leave the o-ring, mid-way down the ceramic shaft while you push them in."
⚠️ **DIY Installation Warning:** This product is intended for experienced users. Electrical repairs carry risk. We recommend using a qualified technician. See full disclaimer [here](https://brevtech.store/pages/disclaimer).
Share
Quick delivery and parts are doing what they supposed to be. Can't be happier
Excellent
These were exactly what I needed to fix my machine. The online installation guide was super helpful too. Fast shipping
The boiler probes were easy to install and worked perfectly. Less 1 start due to the length being 1 inch shorter than the original probes. But the still worked.
These are made specifically for the BES920. You must have the old BES900 version machine. It does mention this above that the old probes are longer on those machines, but still work fine.
Amazing after sales service. Couldn’t fault him at all. Kept in contact with me till it was all sorted. Absolutely will be recommending!