BrevTech
BREVILLE ORACLE SES & BES980/990 サバイバル / サービス キット (120v 240v)
BREVILLE ORACLE SES & BES980/990 サバイバル / サービス キット (120v 240v)
受取状況を読み込めませんでした
The all-in-one service and repair kit for Breville / Sage Oracle BES980 and BES990 machines.
If your Oracle has weak pressure, buzzing solenoid issues, leaking seals, heating faults, 3 beeps of death, poor milk froth, or other age-related problems, this is the most complete starting point in the store.
This kit is designed for owners who want the common Oracle repair parts in one purchase, rather than trying to chase several separate faults one part at a time.
Fits
- Breville BES980 Oracle
- Breville BES990 Oracle Touch
- Sage Oracle equivalents
- 120v and 240v versions
This Kit Is Best For
- Machines with multiple faults or an unknown service history
- Major service work where you want the common wear parts on hand
- Owners who would rather buy one complete kit than several smaller ones
Common Symptoms This Kit Helps Fix
- Loss of pre-infusion
- Buzzing solenoid
- Weak coffee or steam pump pressure
- Leaking seals
- Overheating or underheating
- 3 beeps of death
- Dead grinder
- Poor milk froth caused by air pump issues
What Is Included
Premium O-ring Service Kit
- 6 x Viton genuine OEM O-rings for high-temperature steam circuit connections
- 12 x general-purpose silicone O-rings for brew circuit connections
- 5 x large O-rings for thermal and water level probes
- 1 x tube of food-grade silicone grease
- 1 x group head gasket / seal and vacuum valve O-ring
- 1 x spare hose clip
Solenoid Service Kit
Replacement OLAB solenoid core and gaskets for Oracles with OLAB coffee solenoids or venturi solenoids. Useful for buzzing, poor dispensing, and some air / steam issues.
Triac Repair Kit
Replacement triacs and associated electronic parts to repair the most common Oracle triac board faults, including heating issues caused by leaking O-rings or a stuck solenoid.
Pump Service Kit
For weak pressure or loss of pre-infusion on the coffee pump and steam pump.
Air Pump
Useful when your milk texture and frothing performance have dropped off and the cappuccino is looking more like a flat white.
Thermal Fuse and Boiler Protection Parts
Includes both types of thermal fuses, a steam boiler thermal switch, locking connectors, and spare insulation tubing to cover the common Oracle heating failures.
Other Included Parts
- Replacement lid latch
- Cable management / repair connectors
Important Before You Buy
If you have not replaced the steam boiler probes in over 2 years, I strongly recommend adding the Steam Probe Set. Old probes are a common cause of descale-related damage on Oracle machines.
Useful Videos
DIY Warning
This product is intended for experienced users. Electrical repairs carry risk. Use a qualified technician if you are unsure. Full disclaimer: brevtech.store/pages/disclaimer
Share
Please buy from Brev Tech. The owner has put in a considerable amount of time to make excellent online ガイドs and I think a lot of people just watch them and then buy the parts somewhere else. I’m in the US and it took about a week for the parts to arrive, but I feel like it’s well worth it. In addition, they’ve been very responsive in helping me figure out how to 修理 the machine. Please support this seller!
Thanks Mike!
So grateful that Brevtech take the time to not only pass on their tech and 修理 info but also have a web store with the exact components needed. Triac board bits and new o'rings saw me back up and running with the knowledge to properly maintain my machine going forward. Legends!
Parts worked perfectly! Saved me hundreds or dollars. Thank you for your great you tube videos.
using this kit, I was able to replace all o-rings on both the coffee and steam broiler, clean the probes, replace parts within the the water pump and the solenoid. The knowlege I gained from watching BrevTech's YouTube Channel along with the savings from parts is invaluable. Very pleased with this kit!
Bought the survival kit as i had a water supply problem and hadn't got further with diagnosing it before ordering. I figured I'd get the kit and service the lot.
Turned out my pump was shot. I used the parts from the kit and still very weak so I ended up buying a new motor locally anyway.
While I was ordering from Brevtech their site suggested changing the steam probes at the same time, so I did that too, and assorted other 'o' rings from their kit, including the solenoid 修理 kit.
Very comprehensive kit containing all the parts you'd likely ever need, and may take ages to source otherwise. I now have spares in stock for, say, board 修理 if that is needed in future.
By the way, my delivery got caught by customs entering Canada so I had to pay duty on it too. So although it ended up expensive, it was still half the price of a 修理 at an appliance 修理er, and probably quicker too.
Reviews in Other Languages
A+++
air pump has a much shorter smaller nipple to attach air hose.
